摸清需求：找準選型 “指南針”

　　Identify requirements: find the right selection "compass"

　　明確實際需求是選型的首要任務。首先需確定氣體流量與壓力參數，這如同為鼓風機設定 “工作標尺”。例如污水處理曝氣環節，需依據水體需氧量計算出每分鐘所需的空氣流量；粉體輸送場景則要根據物料特性與輸送距離，確定滿足輸送動力的壓力值。此外，輸送氣體的性質也不容忽視。若輸送清潔空氣，普通材質的鼓風機即可勝任；但若涉及腐蝕性氣體、易燃易爆氣體，就必須選擇具備防腐涂層、防爆設計的特殊機型，避免安全隱患與設備快速損耗。同時，還需結合使用場景的運行時長，連續運轉的工況要求鼓風機具備更高的穩定性與耐用性，選型時應關注設備的軸承壽命、葉輪材質等核心部件性能。

　　Clarifying actual needs is the primary task of selection. Firstly, it is necessary to determine the gas flow rate and pressure parameters, which is similar to setting a "working scale" for a blower. For example, in the aeration process of sewage treatment, the required air flow rate per minute needs to be calculated based on the oxygen demand of the water body; The powder conveying scenario needs to determine the pressure value that meets the conveying power based on the material characteristics and conveying distance. In addition, the properties of the transported gas cannot be ignored. If conveying clean air, ordinary material blowers are sufficient; But if corrosive gases or flammable and explosive gases are involved, special models with anti-corrosion coatings and explosion-proof designs must be selected to avoid safety hazards and rapid equipment wear and tear. At the same time, it is necessary to consider the operating time of the usage scenario, and the continuous operation condition requires the blower to have higher stability and durability. When selecting, attention should be paid to the performance of core components such as bearing life and impeller material of the equipment.

　　對比參數：看懂性能 “密碼本”

　　Comparison parameters: Understanding the performance of the 'password book'

　　羅茨鼓風機的性能參數是選型的核心依據。流量參數決定了設備的 “吞吐能力”，選型時要預留 10%-15% 的余量，防止因工況波動導致供氣不足。例如設計流量為 50 立方米 / 分鐘的系統，宜選擇額定流量在 55-57.5 立方米 / 分鐘的機型。壓力參數關乎設備的 “動力強度”，需確保鼓風機的額定壓力高于實際需求壓力，同時避免壓力選型過高造成能耗浪費。轉速與功率則是設備的 “動力心臟指標”，高轉速機型通常體積更小但噪音較高，低轉速機型運行更平穩但占地較大，需權衡空間需求與噪音控制要求。此外，效率參數是衡量設備經濟性的關鍵，同等流量與壓力下，選擇效率更高的機型，可顯著降低長期運行的電費成本。

　　The performance parameters of Roots blower are the core basis for selection. The flow parameters determine the "throughput capacity" of the equipment, and a margin of 10% -15% should be reserved when selecting to prevent insufficient gas supply due to fluctuations in operating conditions. For example, for a system designed with a flow rate of 50 cubic meters per minute, it is advisable to choose a model with a rated flow rate of 55-57.5 cubic meters per minute. The pressure parameter is related to the "power intensity" of the equipment, and it is necessary to ensure that the rated pressure of the blower is higher than the actual required pressure, while avoiding energy waste caused by excessive pressure selection. Speed and power are the "power heart indicators" of equipment. High speed models are usually smaller in size but have higher noise, while low-speed models run more smoothly but occupy a larger area, requiring a balance between space requirements and noise control requirements. In addition, efficiency parameters are key to measuring the economic efficiency of equipment. Under the same flow rate and pressure, choosing a more efficient model can significantly reduce the long-term electricity cost of operation.

　　關注細節：避開選型 “雷區”

　　Pay attention to details: avoid the selection "minefield"

　　除核心參數外，細節設計同樣影響設備的實用性與壽命。葉輪作為鼓風機的 “核心部件”，其加工精度直接影響氣體輸送的穩定性與效率，應選擇采用精密鑄造工藝、動平衡性能優異的產品，減少因葉輪不平衡導致的振動與噪音。密封結構則關乎設備的可靠性，對于輸送特殊氣體或要求高氣密性的場景，機械密封或迷宮密封設計能有效防止氣體泄漏；而普通工況下，橡膠密封件即可滿足需求。冷卻方式也是重要考量因素，風冷型鼓風機結構簡單、維護方便，適用于小功率機型；水冷型則能有效降低運行溫度，適合大功率、長時間運轉的場景。此外，還需關注設備的噪音控制設計，例如配備消音器、優化殼體結構等，減少對工作環境的影響。

　　In addition to core parameters, detailed design also affects the practicality and lifespan of equipment. As the "core component" of the blower, the machining accuracy of the impeller directly affects the stability and efficiency of gas transportation. Therefore, products with precision casting technology and excellent dynamic balancing performance should be selected to reduce vibration and noise caused by impeller imbalance. The sealing structure is related to the reliability of the equipment. For scenarios where special gases are transported or high airtightness is required, mechanical seals or labyrinth seals can effectively prevent gas leakage; Under normal working conditions, rubber seals can meet the requirements. The cooling method is also an important consideration factor. The air-cooled blower has a simple structure and is easy to maintain, making it suitable for low-power models; The water-cooled type can effectively reduce operating temperature and is suitable for high-power, long-term operation scenarios. In addition, attention should be paid to the noise control design of the equipment, such as equipping silencers, optimizing the housing structure, etc., to reduce the impact on the working environment.

　　適配場景：找到適合 “拍檔”

　　Adaptation scenario: Find the best 'partner'

　　不同行業對羅茨鼓風機的性能需求差異顯著。在污水處理領域，需重點關注設備的耐腐蝕性與防堵塞能力，宜選擇具備防腐蝕涂層、大間隙葉輪設計的機型，避免因污水雜質導致設備故障；食品、醫藥行業則對氣源潔凈度要求極高，需選擇采用食品級密封材料、配備高效過濾器的機型，確保氣體輸送過程無污染。在氣力輸送場景中，應優先選擇壓力穩定、脈沖小的機型，保證物料輸送的連續性與穩定性；而水產養殖增氧時，更看重設備的節能性與靜音效果，低轉速、高效率的鼓風機能降低運行成本且減少對養殖環境的干擾。

　　The performance requirements for Roots blowers vary significantly among different industries. In the field of sewage treatment, special attention should be paid to the corrosion resistance and anti clogging ability of equipment. It is advisable to choose models with anti-corrosion coatings and large clearance impeller designs to avoid equipment failures caused by impurities in sewage; The food and pharmaceutical industries have extremely high requirements for the cleanliness of gas sources, and it is necessary to choose models that use food grade sealing materials and are equipped with high-efficiency filters to ensure that the gas transportation process is pollution-free. In the pneumatic conveying scenario, priority should be given to selecting machines with stable pressure and low pulse to ensure the continuity and stability of material conveying; When aerating aquaculture, more emphasis is placed on the energy efficiency and noise reduction of equipment. Low speed and high-efficiency blowers can reduce operating costs and minimize interference with the aquaculture environment.

　　本文由旋轉供料器友情奉獻.更多有關的知識請點擊:http://m.baihengnewenergy.com/我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message